Product categories


SKU: 4820024424714 Categories: , ,

CASTELLO is an exquisite decorative coating that is specially designed for exterior and interior works. Ground natural travertine of various factions is the main filler in this product. CASTELLO takes the form of natural travertine stone after application through the use of special acrylic polymers and other auxiliary substances.
CASTELLO also includes special synthetic reinforcing fibers that give excellent characteristics to this product. You can achieve a variety of surface textures due to the special structure of this material. Produced in beige base color.

  • Prevents formation of surface cracks
  • Resistant to alkaline cleaning
  • High strength
  • Hides defects of surface preparation
  • High resistance to atmospheric agents
  • High water vapor permeability
Application Technology:

The surface before application must be solid, dry and free from dust, oil and grease. Places affected by mold and moss must be cleaned mechanically and primed with primer D 07 ELF™ or other special agents. Apply quartz-primer QuartzPrimer or quartz-primer D 17 ELF™ on the prepared surface and wait until it’s completely dry (fig. 1).

The material can be applied in one or two layers. When applied in 1 layer it is recommended to use the quartz-primer previously tinted with the selected color. The coating should be applied evenly on the surface with a thin layer and then use the “pulling” technique over the entire surface with the help of stainless steel bevel (fig. 2).

After 10-15 minutes (after stabilization of moisture) begin to smooth the material to compact, seal and level the surface with a stainless steel bevel (fig. 3).

Once the surface begins to dry up it is necessary to continue treating the surface using a plastic bevel to avoid blackening of the surface (fig. 4).

When the coating is applied in 2 layers use the same application technology as for Travertino Style (refer Travertino Style application technology), but use the plastic bevel in order to avoid blackening.You can achieve the look of a natural polished travertine stone by treating surface with the use of electro-polishing tool after the complete drying of the product (24 hours).It is recommended to use such top coats as Finitura Castello or Velatura Vintage for Castello coating (fig. 5).

It is possible to tint Castello using universal colorants as well as using a computer tinting system. Also you should tint the top coats for Castello using universal colorants Decotoner or Toscana Toner or using a computer tinting system to achieve the patina effect.

Weight33 lbs
Available Sizes

TDS (Technical Data Sheet)